Feature update to windows 10 version 1803 download offline

Windows 10 Keeping apps from coming back when deploying the feature update. Each UWP app should be evaluated for applicability in each unique environment.

You will want to install a default installation of Windows 10, version , then note which apps are running and consuming memory. For example, you might want to consider removing apps that start automatically, or apps that automatically display information on the Start menu, such as Weather and News, and that might not be of use in your environment. One of the "inbox" UWP apps called Photos, has a default setting called Show a notification when new albums are available.

The Photos app can use approximately MB of memory; specifically private working set memory, even if not being used. Changing the Show a notification when new albums are available setting for all users is not practical at this time, hence the recommendation to remove the Photos app if it is not needed or desired. For more about this, see the Windows a PowerShell forum.

You can use the built-in Dism. You can set up a Dism. The settings listed here can be applied locally to the base image. Then if the equivalent settings are not specified in any other way such as by group policy, the settings would still apply. The following settings specifically do not counter or conflict with any setting that has anything to do with security. These settings were chosen to remove settings that might not be applicable to VDI environments. In this table of group policy settings, items marked with an asterisk are from the Windows Restricted Traffic Limited Functionality Baseline.

The group policy settings above include settings to turn off checking to see if the system is connected to the Internet. If your environment does not connect to the Internet at all, or connects indirectly, you can set a group policy setting to remove the Network icon from the Taskbar.

The reason you might want to remove the Network icon from the Taskbar is if you turn off Internet connectivity checks, there will be a yellow flag on the Network icon, even though the network might be functioning normally.

If you would like to remove the network icon as a group policy setting, you can find that in this location:. If you are considering disabling system services to conserve resources, take great care that the service being considered is not in some way a component of some other service.

Also, most of these recommendations mirror recommendations for Windows Server with Desktop Experience; for more information, see Guidance on disabling system services in Windows Server with Desktop Experience. Note that a lot of services that might seem to be good candidates to disable are set to manual service start type.

This means that the service will not automatically start and is not started unless a specific application or service triggers a request to the service being consider for disabling.

Services that are already set to start type manual are usually not listed here. Per-user services are services that are created when a user signs into Windows or Windows Server and are stopped and deleted when that user signs out.

These services run in the security context of the user account - this provides better resource management than the previous approach of running these kinds of services in Explorer, associated with a preconfigured account, or as tasks. The following list of tasks are those that perform optimizations or data collections on computers that maintain their state across reboots.

When a VDI VM task reboots and discards all changes since last boot, optimizations intended for physical computers are not helpful. You can get all of the current scheduled tasks, including descriptions, with the following PowerShell code:. Whether from Microsoft Update, or from your internal resources, apply available updates including Windows Defender signatures.

This is a good time to apply other available updates including those for Microsoft Office if installed. Windows is configured, by default, to collect and save limited diagnostic data.

The purpose is to enable diagnostics, or to record data in the event that further troubleshooting is necessary. Others, such as the WiFiSession trace can be stopped.

To stop a running trace under Event Trace Sessions right-click the trace and then select Stop. To prevent the traces from starting automatically on startup, follow these steps:. At some point during the image optimization process available Windows updates should be applied.

You can set Windows Update to install updates for other Microsoft products as well as Windows. This would be a good setting in case you are going to install Microsoft applications such as Microsoft Office to the base image. That way Office is up to date when the image is put in service. There are also. One very important consideration for non-persistent VDI VMs are security updates, including security software definition files. These updates might be released once or even more than once per day.

There might be a way to retain these updates, including Windows Defender and non-Microsoft components. The updates are going to apply nearly every logon session, but the updates are small and should not be a problem.

Plus, the VM won't be behind on updates because only the latest available will apply. The same might be true for non-Microsoft definition files. Modern versions of Office such as Microsoft update through their own mechanisms when directly connected to the Internet, or via management technologies when not. The above article contains procedures to service the gold VDI image, and how to maintain the VDI clients as they are running.

To reduce network bandwidth when VDI computers need to update their Windows Defender signatures, stagger reboots, and schedule reboots during off hours where possible. The Windows Defender signature updates can be contained internally on file shares, and where practical, have those files shares on the same or close networking segments as the VDI virtual machines.

See the paper listed at the beginning of this section for much more information about optimizing Windows Defender with VDI. This is especially important in environments where the VDI or physical computer has a workload that is primarily network based.

The settings in this section bias performance to favor networking, by setting up additional buffering and caching of things like directory entries and so on. Note that some settings in this section are registry-based only and should be incorporated in the base image before the image is deployed for production use. The following settings are documented in the Windows Server Performance Tuning Guideline information, published on Microsoft.

Applies to Windows The default is 0. By default, the SMB redirector throttles throughput across high-latency network connections, in some cases to avoid network-related timeouts. Setting this registry value to 1 disables this throttling, enabling higher file transfer throughput over high-latency network connections, so you should consider this setting.

The default is 64 , with a valid range of 1 to This value is used to determine the amount of file metadata that can be cached by the client. Increasing the value can reduce network traffic and increase performance when many files are accessed.

Try increasing this value to The default is 16 , with a valid range of 1 to This value is used to determine the amount of directory information that can be cached by the client. Increasing the value can reduce network traffic and increase performance when large directories are accessed. Consider increasing this value to The default is , with a valid range of 1 to This value is used to determine the amount of file name information that can be cached by the client.

Increasing the value can reduce network traffic and increase performance when many file names are accessed. The default is This parameter specifies the maximum number of files that should be left open on a shared resource after the application has closed the file. Where many thousands of clients are connecting to SMB servers, consider reducing this value to This guide describes how to do this. Join the 4sysops PowerShell group! Your question was not answered? Ask in the forum! Passwork password manager is a simple yet robust password management solution for the enterprise.

From November 25 to 30, If you received the error message "Windows 10 Enterprise subscription is not valid," this post will show you how Learn how to manage on-premises and remote worker security patching, application, and device control, as well as vulnerability scanning With organizations moving more workloads into Azure, administrators now have more options for running PowerShell commands and scripts across Since the previous releases of Windows 10 included only a few new GPO settings, Microsoft has decided to introduce It is not entirely clear when Can you imagine how long it would take to generate a list of VMs across hundreds of subscriptions on With each new version, Microsoft pushes home users to use a Microsoft account to log in to their computer In this beginner's guide, you will learn how to rename files with PowerShell.

I will demonstrate how to list NetBIOS was initially created to allow applications to communicate without understanding the details of the network, including error recovery Admins can use them to One of Windows's most recently introduced features is SMB compression.

This can reduce the amount of data transferred between The new hardware requirements for Windows 11 apply not only to physical devices but to virtual machines as well Microsoft Intune is a cloud-driven service that allows businesses to onboard, provision, and manage devices, no matter where they Using Microsoft Intune to perform Windows feature updates works well.

In the last year, reporting, and additional status information Today, we will see whether the old The various removable storage media, which can be connected to a PC via plug-and-play, pose a risk of data Windows Server will be available in two main editions: Standard and Datacenter.

If you are not an IT Pro, see the following topics for information about what's new in Windows 10, version in hardware , for developers , and for consumers. The following 3-minute video summarizes some of the new features that are available for IT Pros in this release.

Windows Autopilot provides a modern device lifecycle management service powered by the cloud that delivers a zero touch experience for deploying Windows Using Intune, Autopilot now enables locking the device during provisioning during the Windows Out Of Box Experience OOBE until policies and settings for the device get provisioned, thereby ensuring that by the time the user gets to the desktop, the device is secured and configured correctly.

Windows Autopilot is now available with Surface, Lenovo, and Dell. Check back here later for more information. Windows 10 in S mode is now available on both Windows 10 Home and Pro PCs, and commercial customers will be able to deploy Windows 10 Enterprise in S mode - by starting with Windows 10 Pro in S mode and then activating Windows 10 Enterprise on the computer.

If you want to switch out of S mode, you will be able to do so at no charge, regardless of edition. Once you switch out of S mode, you cannot switch back. With this release you can easily deploy and manage kiosk devices with Microsoft Intune in single and multiple app scenarios.

This includes the new Kiosk Browser available from the Microsoft Store. Kiosk Browser is great for delivering a reliable and custom-tailored browsing experience for scenarios such as retail and signage. A summary of new features is below. With this release, Subscription Activation supports Inherited Activation. Inherited Activation allows Windows 10 virtual machines to inherit activation state from their Windows 10 host.

For more information, see Windows 10 Subscription Activation. For more information, see DISM operating system uninstall command-line options.

You can now run your own custom actions or scripts in parallel with Windows Setup. You can help the site keep bringing you interesting and useful content and software by using these options:. If you like this article, please share it using the buttons below. It won't take a lot from you, but it will help us grow. Thanks for your support! Sergey Tkachenko is a software developer from Russia who started Winaero back in On this blog, Sergey is writing about everything connected to Microsoft, Windows and popular software.

Follow him on Telegram , Twitter , and YouTube. View all posts by Sergey Tkachenko. None of the method mentioned above worked in reinstalling XPS viewer. I am in charge of IT in our organisation and a user is not able to see xps file after the update. Any help is greatly appreciated Thanks. Open an elevated command prompt. Change this to Enabled: Optional Features,e. XPS Viewer.